Description

BIOPROTECT

BIOPROTECT

10, 20, 5 L

WHERE APPLICABLE

"TERMION BIOPROTECT" is an innovative thermo-color for insulation of premises with high humidity. Used to protect and prevent surfaces from fungus, mold and condensation.

  • Harmless, eco-friendly material, water-based.
  • Antifungal additives, which are part of "TERMION BIOPROTECT", can eliminate fungus and mold, preventing their occurrence in the future.

TERMION BIOPROTECT contains 80% of microglasses from glass ceramics 3M (France) and 20% micro-granules of silicone, high-quality acrylic base, antifungal components and other rheological additives.

OPERATING PRINCIPLE

The viscous fraction, consisting of a high-quality imported binder (dispersion), contains air-filled glass-ceramic microspheres with low thermal conductivity and silicone, antifungal components and rheological additives. When applied to the surface, the material is polymerized, the surface is covered with a film of vacuumed ceramic and silicone microspheres, forming a thermal barrier and eliminating condensation.

APPLICATION METHOD

  1. Before coating, it is thoroughly mixed by hand or with a drill (rotation speed up to 200 rpm).
  2. Requirements for the surface on which the thermal insulation is applied: dry and clean (without grease, dirt and dust)
  3. It is not recommended to apply TERMION BIOPROTECT on painted surfaces.
  4. For application, use a roller, brush or spray (airless).
  5. The ambient temperature, when painting, should be in the range: + 5 ° C - + 40 ° C.
Color of the film (basic)
White
Appearance of the coating
Matte, smooth, homogeneous
Density g / cm³
0,55
Hiding power, g / m2 (state standard 8784-75)
176
Calculated thermal conductivity W/m°С
0,0012
Heat dissipation W/m°С
3,9
Thermal resistance m2*C\W (at 1 mm)
1,0
Coefficient of vapor permeability Mg / m h PA
0,012
Adhesion coating (state standard 15140-78)
1 score
The flammability class (except for the modification of NG)
G 1
Coating adhesion by peel strength: 1. 1. coatings to brick Mpa (State All-Union standard 28574-90)
2,00
2. coatings to concrete Mpa (State All-Union standard 28574-90)
1,28
3. coatings to steel Mpa (State All-Union standard 28574-90)
1,2
Storage (in tightly closed containers)
12 months
Actual consumption (single-layer coating) l / m²
0,8~1,0
Drying time, at a temperature (20 ± 2) ° С
0,5 hours
Full drying to grade 3
40 min
Interlayer drying
24 hours
Full polymerization
48 hours
Стоимость по запросу
Leave a request
Please fill in this form, and we will contact you within 10 minutes. Or call us by telephone: +7(499)755-84-90 / +7(800)222-03-56

    Questions and answers
    What is liquid insulation?

    It is a thermal insulation material that is applied to the surface with a brush, roller or brush as a liquid coating.

    Liquid heat-insulating paint (thermal paint) is a new generation coating produced at the LKM NPO Altermo, which allows to cope with such problems as: metal corrosion, freezing, fungal formations, used in almost all industries.

    What are the advantages of liquid insulation?
    • Economically. Due to its special composition, 1 mm replaces 50 mm of mineral wool, which means that it saves not only useful space, but also your funds.
    • Safely. Unlike the same cotton wool, liquid insulation is not a source of harmful dust and is produced taking into account environmental standards.
    • Effectively. The coating is wear-resistant, antifungal, environmentally friendly. And it is also impossible to steal it.
    • Versatile. Liquid thermal insulation is used to insulate facades, walls, floors, window slopes, various containers, pipes, to eliminate condensation, inside and outside, and in the heat and cold. It is in demand even in industry and heat power engineering.
    • Available. Liquid thermal insulation is just beginning to capture the construction market, and our company is one of the first to provide an opportunity to buy in Moscow and not only this unique energy-saving coating.
    Where can liquid insulation be applied?

    Ultrathin liquid thermal insulation TERMION® is highly effective in thermal insulation:

    • Building façades, roofs, interior walls, window jambs, concrete floors, balconies and attics
    • Hot and cold water pipelines
    • Steam pipes, air ducts for conditioning and cooling systems
    • Marine vessels (boats, yachts)
    • Different reservoirs (oil tanks, tank vessels, trailers, containers, refrigerators, etc.)
    • It is used to eliminate condensation on cold water supply pipes and to reduce heat loss in heating systems.
    Contacts
    8 (800) 222-03-56
    Toll-free in Russia
    +7 (499) 755-84-90
    Sales department
    8 (929) 916-77-67
    Director of Sales
    gin@pk-altermo.ru
    For cooperation
    25A, 1 May str., Krasnozavodsk, Moscow Region, Russia

    Additional information

    Фасовка

    10, 20, 5 L

    en_USEnglish