Description
PRIMER FACADE
PRIMER FACADE
TERMION Grunt Facade - Liquid binder / Primer for old and new concrete and facade cement surfaces. Suitable for indoor and outdoor work.
Produced on the basis of acrylic emulsion for use as a general primer for all types of concrete / brick surfaces of roofs / walls / plinths to provide a high degree of waterproofing / increased adhesion to the substrate, for repair work and the creation of coatings with high binding properties. Designed for repair work (patching and coating with high plasticity).
TERMION Primer Facade - The binder is an aqueous solution that can be used for cement mixes. It is ideal for cement mortars and concrete. significantly increases waterproofing and bonding properties.
TERMION Grunt The facade has the following advantages:
- HIGH WATER RESISTANCE
- INCREASES THE STRENGTH OF THE SURFACE OF THE FOUNDATION
- INCREASES ELASTICITY
- INCREASES CLUTCH AND OPERATION LIFE
- PROTECT FROM TERROR
- DOES NOT CONTAIN SOLVENTS
Application area:
- TERMION Grunt Facade designed for preparation
- surface before the application of liquid thermal insulation series TERMION.
Substrate preparation:
The surface must be dry, clean and free from grease. Remains of loose coating, dirt and dust clean mechanically. For degreasing, rinse the surface with 3-5% soda solution, then rinse with water and dry. Glossy surfaces (old oil paint and enamel) shall be treated with a fine sandpaper to a roughness and cleaned from the formed dust. Cracks, potholes and irregularities zashpatlevat, then dry the surface to grind.
Instructions for use:
TERMION Ground Before use, the facade should be mixed well until smooth. Apply primer paint roller, brush or brush evenly over the entire surface, without the formation of puddles. Further finishing work can be done only after the primer has dried completely (after 12 hours after application, depending on drying conditions).
Attention! When working, observe individual security measures. In case of contact with skin or eyes, wash with plenty of water. Keep out of the reach of children.
PRIMING FOR METAL is an anticorrosive alkyd primer. Designed to protect metal from corrosion, the primer is securely protecting the metal surface from aggressive atmospheric effects. This primer contains corrosion inhibitors and can be applied even onto a poorly prepared surface directly on the rust and used as an independent coating of metal products and metal structures.
PRIMER FACADE Deep-penetration primer for concrete, brick, plasterboard, and wooden surfaces. A styrene-acrylic emulsion-based liquid used as general-purpose primer for all kinds of concrete / brickwork surfaces of roofs / walls / plinths to ensure high waterproofing efficiency and higher adhesion to the substrate, for repair works and the creation of coatings with high binding properties.