Description
VOLCANO
VOLCANO
WHERE APPLICABLE
High-temperature liquid thermal insulation "TERMION VOLCANO" is used when it is necessary to perform insulation:
- Gas Transmission Systems
- Smokestacks (made of metal)
- Product pipelines (technological)
- Elements of engines
- Mechanisms and hull parts of ships
- Roofing metal structures
- Pipeline systems, boilers, cisterns and other structures
- Heat Pipelines
"TERMION VOLCANO" is applied on surfaces that can be affected by temperature peaks from -60 ° C to + 600 ° C and withstand aggressive media such as oil products, salts and mineral oils.
Metal surfaces treated with thermal paint "TERMION VOLCANO" will be devoid of corrosion, and industrial equipment with a high operating temperature will protect workers from thermal burns.
"TERMION VOLCANO" on an organic basis, contains 80% microgranules from glass ceramics "3M" (France), 20% special aluminum flakes and rheological additives.
APPLICATION METHOD
- Before coating, it is thoroughly mixed by hand or with a drill (rotation speed up to 200 rpm).
- Requirements for the surface on which the thermal insulation is applied: dry and clean (without grease, dirt and dust)
- It is not recommended to apply TERMION VOLCANO on painted surfaces.
- For application, use a roller, brush or spray (airless).
- The ambient temperature, when painting, should be in the range: +7°C-40°C.
- The coating, on the surface of the metal, is applied in 2 - 3 layers, using an intermediate drying for up to 24 hours (drying time depends on t ° ambient air).
- Drying of the coating occurs after 48 hours under natural conditions at t° = 20°C.
- Full solidification of the material takes place during heating during operation.
With the help of thermal engineering calculations, the total thickness of the coating is determined.
Factory cast composite material Limited Liability Company nongovernmental organization "Altermo" - company that works in the market of energy-saving coatings since 2011.
It is a thermal insulation material that is applied to the surface with a brush, roller or brush as a liquid coating.
Liquid heat-insulating paint (thermal paint) is a new generation coating produced at the LKM NPO Altermo, which allows to cope with such problems as: metal corrosion, freezing, fungal formations, used in almost all industries.
- Economically. Due to its special composition, 1 mm replaces 50 mm of mineral wool, which means that it saves not only useful space, but also your funds.
- Safely. Unlike the same cotton wool, liquid insulation is not a source of harmful dust and is produced taking into account environmental standards.
- Effectively. The coating is wear-resistant, antifungal, environmentally friendly. And it is also impossible to steal it.
- Versatile. Liquid thermal insulation is used to insulate facades, walls, floors, window slopes, various containers, pipes, to eliminate condensation, inside and outside, and in the heat and cold. It is in demand even in industry and heat power engineering.
- Available. Liquid thermal insulation is just beginning to capture the construction market, and our company is one of the first to provide an opportunity to buy in Moscow and not only this unique energy-saving coating.
Ultrathin liquid thermal insulation TERMION® is highly effective in thermal insulation:
- Building façades, roofs, interior walls, window jambs, concrete floors, balconies and attics
- Hot and cold water pipelines
- Steam pipes, air ducts for conditioning and cooling systems
- Marine vessels (boats, yachts)
- Different reservoirs (oil tanks, tank vessels, trailers, containers, refrigerators, etc.)
- It is used to eliminate condensation on cold water supply pipes and to reduce heat loss in heating systems.
English 
Russian 